Features:

1. Mixed-cut: metal-Stainless steel,carbon steel and non-metal-acrylic,board.

2. High precision: Adopt YAKO stepper motor with PMI Linear Rail transmission greatly improve the response speed & cutting precision of equipment, extend the time of using.

3. Constant light system :The machine uses the constant light,achieving high precision cutting of the whole area.

4. High precision and stability: with precision Japan ONK belt & Chinese Taiwan PMI Linear Rail transmission mechanism and optimized the Ruida RDC 6332M system control, it can meet the precision parts processing ,stable dynamic performance, also can work for long hours.

5. The cutting section with good quality: mechanical follow-up cutting head system : cutting head always follow the material to keep the cutting point location unchanged, which insures smooth cutting section without processing again .It can adapt to flat or curved surface sheet cutting. 

6. Adopt Yongli / RECI sealed CO2 laser tube, main consumable items are electric energy, water-cooling,auxiliary gas and laser light.

7.Stronger structure 3.2mm steel,easy operation, stable laser device & low maintenance cost.

Applicable materials:

1) Applicable industry:Mainly used for advertising industry (stainless metal and carbon steel),sheet metal industry (carbon steel), packaging industry (die board) and so on .

2) Applicable materials:acrylic, stainless steel ,carbon steel,MDF,die board.

3) Applicable show: metal spectable frame,furniture plate cutting,MDF photo frame cutting, building model cutting.

Parameters:

Samples:

Machine parts details:

Yongli / RECI combined CO2 laser tube, able to cut most non-metal materials, such 30mm acrylic, perspex, 15mm wood, 12mm MDF, plastic, paper, cardboard, PVC, rubber, cloth, leather, etc. and 1.5mm stainless steel, carbon steel.

Auto focus sensor can keep fixed focus distance while cutting metal. Air blowing device can remove cutting smoke and dust to protect focus lens, nozzles and auto focus sensor. Yako stepper motor provide power for multi head up down auto focus.

Each metal and non-metal mixing machine we will be equipped with two sets of metal nozzles,The metal cutting nozzle has a smaller hole diameter and a higher height, while the non-metal cutting nozzle has a larger hole diameter and a lower height.

Adopt Japan top brand ONK belt and YAKO stepper motor and driver, it can run reliable and has high precison.

The control cabinet mainly includes a Ruida 6332M control board card, a Live-Focus-System control board card, four drivers, and a 48V supply to power the driver, a 24V supply to power the control card, two voltage filter, Schneider breaker.

Adopt S&A water chiller,  It can continue to cool the laser so that the laser can continue to work efficiently.

Front panel Ruida 6332M,you could adjust cutting speed and power from here.

Color screen on the right side of the machine, you can switch metal cutting and nonmetal cutting from here.

Blade work table with tweezers anti-static from machine, blade table suitable for hard materials, such as acrylic, wood, steel, spong, etc.

Control software:

RD MetalCut is easy to coperate User-friendly
Compatible software: Coreldraw and Autocad 
Control software language :English/Chinese 
Software environment : Windows xp/7/8/10
Graphic formats: DST,PLT,DXF,AI,LAS,BMP,JPG,PNG,etc

Optional:

2 laser heads: one is special laser head with auto focusing system for cutting, another is normal laser head  for engraving.