Home > News > Maintain CNC Router in winter.


Maintain CNC Router in winter.
2014-12-26 15:11:08

Maintain CNC Router in winter.
Maintain CNC Router in winter
Now the weather is getting colder, many machines need special protection to be able to work normally, stone cnc machine is one of them, then how to maintain stone engraving machine in winter?
Cnc router for stone with  water cooling system, it in optimizing the stone cnc engraviong  machine performance, at the same time itself also has limitations. Usually, a temperature suitable for engraving is between 0-45 degrees, when the temperature is below 0 degrees Celsius, the tap water used for cooling occurs frozen, will affect the use of the cnc machine. Moreover, stone cnc machine uses the relative humidity is between 30% -75%, too dry and too wet environment is not conducive to optimal play cnc machine control and power system. The winter dry environment is also not conducive to the normal use of the cnc machine.
So, in winter, you should pay attention to the warmth of the CNC Router  engraving machine,timely removal of the remainder of the water in the aqueduct, avoid the next day freeze affect the water cycle; water  pump should be promptly removed from multiply water tank or bucket, to avoid freezing in there. Secondly, we must pay attention to maintain the humidity within the plant, too dry, you can increase the number of times of mopping the floor, keep the plant the appropriate humidity. Suggest you do not put the machine on outdoor in winter, it is best to move the machine to the plant.

Previous   [Return Home] [Print] [Go Back]   Next

Brand Zone

Contact Us