GW-1390 metal and nonmetal laser cutting machine with RECI W6 laser tube, Yongli-280W laser tube
Product Name:
GW-1390 metal and nonmetal laser cutting machine with RECI W6 laser tube, Yongli-280W laser tubeModel No.:
GW-1390Minimum Order:
1
Product Abstract:
1 User Manual 2 Yongli-280W RECI W6 CO2 sealed glass tube 3 PMI Linear Rail 4 TBI ballscrew 5 Ruida 6332M controller 6 Omoron limited 7 Schneider breaker 8 USA IIVI mirrors lens 9 Japan Pansonice servo motor 10 Porotector glasses- Product Description
Features:
1. Mixed-cut: metal-Stainless steel,carbon steel and non-metal-acrylic,board.
2. High precision: Adopt Japan Panasonic servo motor with PMI Linear Rail + gear rack transmission greatly improve the response speed & cutting precision of equipment, extend the time of using.
3. Constant light system :The machine uses the constant light,achieving high precision cutting of the whole area.
4. High precision and stability: with precision Helical Gear Rack & PMI Linear Rail transmission mechanism and optimized the Ruida RDC 6332M system control, it can meet the precision parts processing ,stable dynamic performance, also can work for long hours.
5. The cutting section with good quality: mechanical follow-up cutting head system : cutting head always follow the material to keep the cutting point location unchanged, which insures smooth cutting section without processing again .It can adapt to flat or curved surface sheet cutting.
6. Adopt Yongli / RECI sealed CO2 laser tube, main consumable items are electric energy, water-cooling,auxiliary gas and laser light.
7.Stronger structure 3.2mm steel,easy operation, stable laser device & low maintenance cost.
Applicable materials:
1) Applicable industry:Mainly used for advertising industry (stainless metal and carbon steel),sheet metal industry (carbon steel), packaging industry (die board) and so on .
2) Applicable materials:acrylic, stainless steel ,carbon steel,MDF,die board.
3) Applicable show: metal spectable frame,furniture plate cutting,MDF photo frame cutting, building model cutting.
Parameters:Model
GW-1390M
Engraving and Cutting Area
1300*900mm
Tube type
CO2 sealed glass tube
Laser wave
10.6um
Laser Power
RECI W6
Yongli DLT-280W
Cooling
CW5200
CW6000
Engraving Speed
0-60,000mm/min
Cutting Speed
0-30,000mm/min
Reposition Accuracy
±0.01mm
Minimum Character Size
English:1mm ; Arabic numbers:1mm
Resolution
1,000--10,000 dpi
File output mode
2.0 USB interface
Machine Power
<3,700W
Support Format and Software
PLT,DST,DXF,DWG.CDR, AI, Auto CAD, Coreldraw, Photoshop, Metalcut
Table
Knife working table
Working Environment Temperature
0-45°C
Drive system
AC Panasonic servo motor + TBI ballscrew
Control system
RDC6332M control system
Exhaust smoke system
550W exhaust fan
Working Voltage
220V,50HZ/60HZ
N.W.
600KGs
G.W.
800KGs
Warranty time
2 years for machine;10 months for tube
Package
Plywood case with steel tube
Packing size
2370*1960*1300mm
Delivery time
15--20 working days
Samples:
Machine parts details:
Near the laser head, there is a auto focus sensor and an air blowing device.
Auto focus sensor can keep fixed focus distance while cutting metal.
Air blowing device can remove cutting smoke and dust to protect focus lens, nozzles and auto focus sensor.
Each metal and non-metal mixing machine we will be equipped with two sets of metal nozzles,The metal cutting nozzle has a smaller hole diameter and a higher height, while the non-metal cutting nozzle has a larger hole diameter and a lower height.
Adopt Japan top brand PANASONIC servo motor and driver, it can run reliable and has high precison.
Machine equipped with Taiwan TBI ball screw and PMI linear rail, it is mainly for ensuring higher precision for cutting.
The control cabinet mainly includes a Ruida 6332M control board card, a Live-Focus-System control board card, four drivers, and a 48V supply to power the driver, a 24V supply to power the control card, two voltage filter, Schneider breaker.
Adopt S&A water chiller, It can continue to cool the laser so that the laser can continue to work efficiently.
Laser power supply has good quality and stable output to extend the laser tube service time.
RECI-150W / 180W CO2 sealed glass laser tube and Yongli-280W / 300W combined CO2 laser tube, able to cut most non-metal materials, such 30--35mm acrylic, 20--26mm wood, 15--22mm MDF, 25--30mm plywood, plastic, paper, cardboard, PVC, rubber, cloth, leather, etc. and 3mm stainless steel, carbon steel, 2mm galvanized steel.
Front panel Ruida 6332M,you could adjust cutting speed and power from here.
Color screen on the right side of the machine, you can switch metal cutting and nonmetal cutting from here.
Blade work table with tweezers anti-static from machine, blade table suitable for hard materials, such as acrylic, wood, steel, spong, etc.
Control software:
RD MetalCut is easy to coperate User-friendly
Compatible software: Coreldraw and Autocad
Control software language :English/Chinese
Software environment : Windows xp/7/8/10
Graphic formats: DST,PLT,DXF,AI,LAS,BMP,JPG,PNG,etcOptional:
2 laser heads: one is special laser head with auto focusing system for cutting, another is normal laser head for engraving.
Packing:
- Related Products
- GW-1610 CO2 Multi cnc laser cutting machine for 2mm steel and 30mm acrylic
- GW-1325 metal nonmetal laser cutting machine 150W 280W
- GW-1530 / 2030 CO2 metal nonmetal laser cutting machine
- GW-1390 U.S Synrad metal tube 200W laser cutting machine for metal and nonmetals
- GW-1390 metal and nonmetal laser cutting machine with RECI W6 laser tube, Yongli-280W laser tube
- GW-1325 metal nonmetal laser cutting machine 280W + 60W
- GW-1390CM 150W 180W 220W 300W metal and nonmetal laser cutting machine
- [Return Home] [Print] [Go Back]
Products Search
Brand Zone
Contact Us
Contact Person:
Godwin GaoTel:
+8615553103090 ; 13296418707Fax:
E-mail:
info@god-worker.com- sales@god-worker.com