Home > Laser Marking Machine > Gold silver jewelry laser marking cutting machine 50W 70W 100W

Gold silver jewelry laser marking cutting machine 50W 70W 100W

  • MOPA color fiber laser marking machine
  • IPG fiber laser marking machine
  • Portable fiber marking machine for steel name plates and tag, plates
  • GW-50C coconut laser marking machine, invitation card laser marking machine,co2 laser marking machine for wood, co2 laser marking machine for leather, wedding card laser marking machine
  • Godworker 200W Coherent CO2 RF laser marking machine for Invitation card, wedding card, leather, wood
  • Fiber Laser Cleaning Machine for Metal Surface Rust Removal,metal surface rust removal laser cleaning machine
  • Portable CO2 RF laser marking machine Dealer price
  • Portable fiber laser marking machine
  • Gold silver jewelry laser marking cutting machine 50W 70W 100W
  • Large size Dynamic focusing CO2 laser marking machine for cutting paper card
  • 30W Handheld fiber laser marking machine
  • 60W 100W 3D relief fiber laser marking machine
  • N95 mask laser marking machine 5W UV laser flying marking machine
  • 3 in 1 fiber laser welding cleaning cutting machine
  • 1KW 1.5KW 2KW fiber laser welding machine

Product Abstract:

IPG , Raycus laser source, F-Theta lens, BJ-JCZ control card, SINO Galvanometer, Protector glasses

Product Description


1.Best Marking Effect: the laser beam of fiber laser is fine and thin. It can provide the best marking effect among all the laser machine machines. Especially good in smallest character marking, such as mark on IC chip.

2.Deep Marking: Fiber laser can make deep marking up to 1.0mm on stainless steel and aluminum. So it’s suitable for the industries which has high requirement to the depth and accuracy.

3.Higher Accuracy: fiber laser can reach up to 0.001mm precision.

4.Long lifetime: We used the fiber laser module made by Germany IPG technology, the lifetime of the fiber laser device is 8 thousand hours, so the machine can be used for long time

5.No consumables: Fiber laser machine can be used for 8-10 years with any consumables. 

6.Free of Maintenance: Fiber laser machine can be used free of maintenance. 

7.Low Power Consumption: low cost, only 0.5kw/hour. It's more economized and environmental.


Applicable Industries:

Electronics and communication tools , IC chips, computer accessories and electrical appliances, all kinds of precise conponents, hardware tools, instrument and meter, aerospace devices, jewelry, clocks, gifts, office supplies, trademark signs, sanitary ware, table ware, food, beverages , tobacco and alcohol and many other industries for marking logos, symbols, words, and also can be used in production line for mass quantities work.

Application Materials:

1. All metals: gold, silver, titanium, copper, alloy, aluminum, steel, manganese steel, magnesium, zinc, stainless steel, carbon steel / mild steel, all kinds of alloy steel, electrolytic plate, brass plate, galvanized sheet , Aluminum, all kinds of alloy plates, all kinds of sheet metal, rare metals, coated metal, anodized aluminum and other special surface treatment, electroplating the surface of the aluminum-magnesium alloy surface oxygen decomposition.

2. Non-metallic: non-metallic coating materials, industrial plastics, hard plastics, rubber, ceramics, resins, cartons, leather, clothes , wood, paper, plexiglass, epoxy resin, acrylic resin, unsaturated polyester resin material.


Special marking software:

Marking software in WINDOWS interface, English operating system, compatible with PHOTOSHOP, CORELDRAW, AUTOCAD and so on many kinds of drawing software: time date, bar code, serial number, mark, output in English, graphics, all kinds of bar code, Qr code, etc. Word stock the function is all ready, 200 kinds of fonts, can customize wired font, creating one of the proprietary dictionaries.

Technical Parameteres:


GW-50F / 70F / 100F

Laser device

Germany IPG / China RAYCUS fiber laser source

Central emission wavelength:


Average output power

50W / 70W / 100W

Beam Radiation Angle


Modulation frequency range


Beam Quality


Working Environment

Clean and dust free or dust less

Marking Depth

0.1---5mm (depending on the materials)

Maximum speed




Repeat location accuracy


Emission Bandwidth (FWHM)

<10 nm

Long-term average power instability


Pulse width, (FWHM)

100 ns

Laser switching ON/OFF time

180 μsec

Energy per pulse (PRR = 20 kHz)

0.95 mJ

Digital Galvanometer Scanner


Field lens

RONAR-SMITH F-theta lens

Marking range

110*110mm / 200*200mm / 300*300mm

Working stability (8h)


Minimum line width


Minimum character height


Sheet label marking time

≤ 90 s (depend on the content)

Control board

BJ-JCZ,support USB interface

Laser power supply

<1000W / 220V / 50Hz,

Cooling mode

Air cooling

The Max input power

220V,50/60Hz,about 2.5A

Environmental Requirement


Graphic Format Supported



2 years


Exported plywood case

Delivery time

5 working days

Packing size




Samples show:

Silver, gold, brass jewelry cutting:

gold silver jewelry laser marking cutting machine

Jewelry rings, necklace, watch, studs marking:

jewelry fiber laser marking machine

Other industries marking:

laser marking machine samples

Machine details:

JCZ EZCAD software, easy cooperating and user-friendly.

Fiber laser marking machine software

Galvanometer: Sino galvanometer,Fast response speed. 

SINO Galvo scanner for jewelry laser marking machine


F-theta-lens: Adopt Singapore RONAR-SMITH F-theta lens, very good focusing. It standard size is 110*110mm, but 200*200mm, 300*300mm,can be customized  by your materials size or shape.

 F-theta lens for jewelry laser marking machine


Lifting Handle: control the precision scale lifting,easy to use.

Lifting handle

Special 2D Working table for Jewelry: Put the marking object on here, can collect silver, gold cutting dust.

2D working table for collect dust.jpg

IPG fiber laser source: Germnay IPG Laser source ensures the very stable quality and extreme long lifetime.

IPG fiber laser source for laser marking machine

Control board: BJ-JCZ board card has high precision and more working stable.

JCZ control card for laser marking machine

Control cabinet: the largest of which is to power the laser, the medium-sized one is to supply power to the galvanometer, and the smallest is to supply power to the control card.

Godworker fiber laser marking machine control box

Protective glasses: Professional protect eyes from laser injure.

Protective glasses

Jewelry laser marking machine option parts

ipg laser marking machine's SCANLAB Galvo

Our services:

Pre-Sales Service:

1.Free pre-sales consulting / Free sample marking/testing 

2.Any kind of technical support are available for users. 

3.We offer progressing solution design to all the distributor and users.


After-Sales Service:

1. 3 years warranty (People damaged are charged).

2. Full technical support\ by e-mail, call and video

3. Lifelong maintenance and spare parts supply.

4. Free design of fixtures as customers required.

5. Free training installation and operation for the staffs.



--First,the machine will be packed with plastic wrap tightly,and the plastic wrap will be many layers onto the machine,the plastic will stop the moist air entering the machine.this is very important during the sea transportation. Moist air will etch the machine.

--Second, we will use the air cushion film to pack the machine,and it can avoid the scratching the machine during the transportation.

--Third,we will use the plywood case to package the machine for the last step,and we will also put some form between the plywood case and the machine,the foam can buffer light impact during the transportation.And the bottom of the plywood case has steel beam,it can support the machine well.The plywood case is fumigation-freepackage for jewelry laser marking machine

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Brand Zone

Contact Us