Home > Laser Marking Machine > MOPA color fiber laser marking machine

MOPA color fiber laser marking machine

  • MOPA color fiber laser marking machine
  • IPG fiber laser marking machine
  • Portable fiber marking machine for steel name plates and tag, plates
  • GW-50C coconut laser marking machine, invitation card laser marking machine,co2 laser marking machine for wood, co2 laser marking machine for leather, wedding card laser marking machine
  • Godworker 200W Coherent CO2 RF laser marking machine for Invitation card, wedding card, leather, wood
  • Fiber Laser Cleaning Machine for Metal Surface Rust Removal,metal surface rust removal laser cleaning machine
  • Portable CO2 RF laser marking machine Dealer price
  • Portable fiber laser marking machine
  • Gold silver jewelry laser marking cutting machine 50W 70W 100W
  • Large size Dynamic focusing CO2 laser marking machine for cutting paper card
  • 30W Handheld fiber laser marking machine
  • 60W 100W 3D relief fiber laser marking machine
  • N95 mask laser marking machine 5W UV laser flying marking machine
  • 3 in 1 fiber laser welding cleaning cutting machine
  • 1KW 1.5KW 2KW fiber laser welding machine

Product Abstract:

JPT MOPA laser source, BJ-JCZ control board, EZCAD software, F-thate lens, SINO galvanometer scanner

Product Description


1.Excellent beam quality: This series of fiber laser marking machines are much better than the traditional marking machine, condensation diameter is less than 20um, divergence angle is 1/4 of the semiconductor pumping source laser, used in accurate marking

2.Low use-cost: high turnover ratio between electricity and laser, the whole machine power consumption is less than 500W, which is 1/10 of light pumping source laser

3.Maintenance-free Operation: There is no need of any maintenance for laser, or to adjust /clean the lens

4.Fast marking speed, 2-3 times faster than the traditional marking machine 

5.Long working life: using fiber laser as pumping source, the working hours can reach as long as 80,000--100,000 hours

6.Rotary worktable system is optional, thus, accomplish marking on cambered surface.

7.Air-cooling, easy transportation, also have the portable type.

8.This machine cannot be affected by bad environment and the temperature change.

9.Pulse frequency can be modulated from 1 KHz to 1000 KHz to satisfy different application requirements of various materials.

Product Application:

1.JPT Mopa Metal Color Fiber laser marking Machine is capable of carving the metal materials and partial non-metal materials,especially suitable for some fields required more precise and higher smoothness.

2.JPT Mopa Metal Color Fiber laser marking Machine is widely used in the electronics separation components,integrated circuit,electrical engineering circuit,mobile communication,hardware,tools,kitchen wares,tool fittings,precise apparatus,eyeglasses and cloc,computer keyboard,jewelry accessories,plastic buttons,water heating fittings,sanitary ware,PVC pipelines,medical apparatus and packing container,etc.



GW-20 / 30 / 60 / 70 / 100M

Laser device

JPT MOPA laser device 

Optical maser wavelength


Average output power






Beam Radiation Angle


Modulation frequency range


Beam Quality


Working Environment

Clean and dust free or dust less

Marking Depth

0-1mm(depending on the materials)

Maximum speed




Repeat location accuracy


Galvanometer scan head


Field lens

Singapore RONAR-SMITH F-theta lens 

Marking range

100*100mm / 200*200mm 

300*300mm(can’t mark color on steel)

Working range

182mm x (±2mm)

Working stability (8h)


Minimum line width


Minimum character height


Sheet label marking time

≤ 90 s (depend on the content)

Control board

BJ-JCZ support USB interface

Laser power supply

<500W / 220V / 50Hz,

Cooling mode

Air cooled

The Max input power

220V,50Hz,about 2.5A

Environmental Requirement


Graphic Format Supported



2 years


Wooden case

Delivery time

5 working days

Packing size





Machine details:

The M1 & M6 series are a fiber laser with direct-modulated semiconductor lasers as a seed source (MOPA) scheme with perfect laser characteristics and good pulse shape control (M6).

JCZ EZCAD software, easy cooperating and user-friendly.

Lifting handle: By hand rotate the wheel to adjust height can get strong point that is correct focus distance.

Digital galvanometer scanner: Adopt SINO brand, it has fast marking speed and the high-quality marking effects.

F-theta-lens: Adopt Singapore RONAR-SMITH F-theta lens, very good focusing. It standard size is 110*110mm, but 200*200mm, 300*300mm,can be customized  by your materials size or shape.

Aluminum working table: As the picture shows, the target metal materials to be marked put on the fixed table.

Red light postioning: Laser is invisible, so the red dot can help you to show the target pattern size and laser position.

Control cabinet: the largest of which is to power the laser, the medium-sized one is to supply power to the galvanometer, and the smallest is to supply power to the control card.

Our services:

Pre-Sales Service:

1.Free pre-sales consulting / Free sample marking/testing 

2.Any kind of technical support are available for users. 

3.We offer progressing solution design to all the distributor and users.

After-Sales Service:

1. 3 years warranty (People damaged are charged).

2. Full technical support\ by e-mail, call and video

3. Lifelong maintenance and spare parts supply.

4. Free design of fixtures as customers required.

5. Free training installation and operation for the staffs.


--First,the machine will be packed with plastic wrap tightly,and the plastic wrap will be many layers onto the machine,the plastic will stop the moist air entering the machine.this is very important during the sea transportation. Moist air will etch the machine.

--Second, we will use the air cushion film to pack the machine,and it can avoid the scratching the machine during the transportation.

--Third,we will use the plywood case to package the machine for the last step,and we will also put some form between the plywood case and the machine,the foam can buffer light impact during the transportation.And the bottom of the plywood case has steel beam,it can support the machine well.The plywood case is fumigation-free.

Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Brand Zone

Contact Us